CALL NOW 888-901-1338

Collector and Classic Car Insurance for Less

CALL NOW 888-901-1338

Collector and Classic Car Insurance for Less

Project COVID-1953

fuel lines 1953 bel air restoration

Episode 35: Project-COVID 1953 – Installing the Fuel Tank and Fuel Line 1953 Bel Air Restoration

  Transcript Hi, everybody. Welcome back to project COVID 1953, our 1953 Chevy 150 Project. Just a quick update to let you know more things are going on with the car.  I went ahead and installed the gas tank for the final time. If you remember from before, I had to do a lot of …

Episode 35: Project-COVID 1953 – Installing the Fuel Tank and Fuel Line 1953 Bel Air Restoration Read More »

buffing 1953 bel air

Episode 33: Project-COVID 1953 – Sanding & Buffing Firewall 1953 Bel Air Restoration

  Transcript Welcome back everybody to Project COVID 1953, our 1953 Chevy 150 Project. I’m here to let you know what I did to the firewall. I went ahead and wet sanded and buffed the firewall, I’m gonna be working around it. I don’t wanna try to wet sand and after, put things through the …

Episode 33: Project-COVID 1953 – Sanding & Buffing Firewall 1953 Bel Air Restoration Read More »

bel air restoration rust removal

Episode 32: Project-COVID 1953 – Rust Removal & More Bodywork

Transcript: Okay, welcome back everybody to project COVID 1953, our 1953 Chevrolet 150 project. To give you an update a lot of work’s been going on. It’s not the most exciting thing to watch, so I haven’t posted every little thing I’ve done. But there’s a lot that’s happening. I’m still doing a lot of …

Episode 32: Project-COVID 1953 – Rust Removal & More Bodywork Read More »

1953 bel air restoration

Episode 31: Project-COVID 1953 – Disassemble The Grill and Doors

Project-COVID 1953 Bel Air Restoration – Disassemble The Grill and Doors Rick Drewry Welcome back everybody to project COVID 1953, our 1953 Chevrolet restoration project. Give you an update on where we’re at. I was getting ready. We’re doing the bodywork, getting into that. So I had to do a little disassembly. The first thing …

Episode 31: Project-COVID 1953 – Disassemble The Grill and Doors Read More »

removing engine rust

Episode 29: Project-COVID 1953 – Cleaning The Rust Out Of The Engine

Episode 29 – Removing the rust! Rick notices brown water after flushing the radiator and engine. Looking for a good, inexpensive way to clear rust out of the water jackets, Rick gets some Evapo-Rust and gets to work. Check out the impressive results! The water jackets are as clean as a whistle, and after re-flushing, …

Episode 29: Project-COVID 1953 – Cleaning The Rust Out Of The Engine Read More »

ep 28 frame modification

Episode 28: Project-COVID 1953 – Frame Modifications & Welding The Mounts

Episode 28 – Quick update on the 1953 Chevy 150. Rick is back in the garage finishing up some front suspension work and tackling a much-needed frame modification for the exhaust to run out properly. Removing a lot of old brackets and using 1/8-inch angle iron to fill in the frame, it’s just as strong …

Episode 28: Project-COVID 1953 – Frame Modifications & Welding The Mounts Read More »

rear end suspension

Episode 26: Project-COVID 1953 – Update On The Rear Suspension

Episode 26 – The 1953 Chevy 150 came with a second-gen 8.5” 10-bolt 373 Posi unit that Rick believes will be more than enough to handle the small block Chevy he’ll be running. Once started on the rear-end suspension, Rick discovers some traction bars were welded up oddly and some weird modifications had been made …

Episode 26: Project-COVID 1953 – Update On The Rear Suspension Read More »

Scroll to Top